Hewlett Packard HP0-Y19 Exam - GetRealQuestions.com

Free HP0-Y19 Sample Questions:

1. What is the effect of the following command entered at the CLI of a ProCurve Switch 5406zl?
5406zl(vlan-100)#interface a1
A. The CLI displays the status of port A1.
B. Port A1 becomes a tagged member of VLAN 100.
C. The CLI enters the configuration context for port A1.
D. Port A1 is enabled.
Answer: C

2. What is the effect of the following command entered at the CLI of a ProCurve switch?
ProCurve Switch> enable
A. Configuration changes are saved.
B. The CLI displays an authentication prompt.
C. The privilege level moves from Operator to Manager.
D. All switch ports are enabled.
Answer: C

3. How can you ensure that a particular switch will be elected Root Bridge of an MST instance, assuming all Spanning Tree settings on other switches are at the default?
A. Set the Bridge Priority for the instance to 0.
B. Set the Port Priority for each port in the instance to 0.
C. Set the Bridge Priority for each VLAN in the instance to 0.
D. Set the CIST Bridge Priority to 0.
Answer: A

4. Which protocol is enabled when the following command is entered at the CLI of a Switch 3500yl?
3500yl(config)#spanning-tree
A. PVST
B. RSTP
C. MSTP
D. STP
Answer: C

5. You must configure a Wireless Edge Services Module and associated Radio Ports (RPs), which are currently at factory defaults. Which item must be defined before the module can adopt any RPs?
A. primary WLAN
B. configuration mode
C. RP VLAN IP address
D. country code
Answer: D

6. In ProCurve Manager Plus, which user type can configure and manage network devices but cannot add, delete, or modify user accounts?
A. operator
B. manager
C. viewer
D. administrator
Answer: A